Designed specifically for the marine environment in non corrosive materials, so waterproof that they are even submersible!
Using an in line motor that can lift up to 340kg, the clutchless ball screw design always runs in sync on dual lift applications and never binds.
The ball screw spins freely when actuator is fully extended or closed, thus eliminating costly limit switches or overrides.
Motor draw is only 5 amps @ 12 volts.
Because of the 12 volt actuation, installation is very simple, requiring only that the unit(s) be mechanically through fastened, and joined with a single electrical cable, saving hours of work and frustration compared to hydraulic systems.
The actuators are self locking in both directions at any point of travel, so you can be confident the hatch will stay at any position you choose.
Actuator housings are glass reinforced UV resistant Celanex 3300, and the push rod is stainless steel, for years of reliable service even in totally exposed installations.
To install a Lenco hatch lift you will require:
• 1 x rocker switch
• 1 x actuator for every 340kg of force required
• Mount fastenings and 12 volt DC power
55554 Retracted Length 508mm Stroke 203mm Overall Extended 711mm
55558 Retracted Length 610mm Stroke 305mm Overall Extended 914mm
55562 Retracted Length 737mm Stroke 406mm Overall Extended 1143mm
55566 Retracted Length 838mm Stroke 510mm Overall Extended 1346mm
55570 Retracted Length 945mm Stroke 610mm Overall Extended 1541mm